Out of bubbles? We offer
a soda stream gas cannister refill service.
Each gas exchange
provides up to 60 Liters of sparkling water, depending on sparkling water maker
and level of carbonation.
- Place the cylinder on
a flat sturdy surface in an upright position and remove the seal and cap by
twisting it counter-clockwise. Make sure to remove the carbonating bottle if it
is installed in the Sparkling Water Maker.
- With the Sparkling
Water Maker in an upright position on a flat, sturdy surface, remove the back
cover by pressing on the top and pulling it away from the body of the Sparkling
Water Maker.
- Set the back cover
aside.
- Gently tip the
Sparkling Water Maker forward and insert the cylinder into the back. First
insert the base of the cylinder followed by the body and then tilt it towards
your Sparkling Water Maker.
- Screw the cylinder
counter-clockwise while applying gentle pressure until it is firmly held in
place. Do not use tools and make sure the cylinder is secured in its place.
- Reinstall the back
cover by fitting the upright tab at the bottom into the rear slot at the base
of the Sparkling Water Maker. Then push the cover into place onto the back of
the Sparkling Water Maker.
Simply pay a £10.00
deposit for your refill bottle and enjoy your bubbles!
Available for
collection only